Once all the exterior colours had been chosen we could now move back to the inside.
In terms of joinery I already had a kitchen layout so we knew where the plumbing and drainage would be when laying the foundations. Now it was time to finalise the details and make any changes. This is not because our kitchen is due to be made any time soon but I needed to make decisions to enable other decisions to be made, plus I just wanted to get the job done!
How Do You Use Your Utility Areas?
In terms of kitchen layout, designers often use rules for placements, and order of appliances. This is based on common usage patterns. However, this must also be considered against how you yourself use the kitchen, which for me is a bit different to ‘theory’.
Apparently, a prep area for many is next to the hob. However, our hob is on the back wall and I like to prep on the island bench and be facing the open room and the people (not facing the wall due to my hob being against that wall). So, because my prep area was not in the standard place, the bins were not in the right place. I also looked at where dirty dishes were likely to be piled. Again, ours are usually on the nearest bench to the dining area not the back wall. I wanted a smooth transition from picking up dirty plates, scraping them clean, rinsing them off in sink then loading into dishwasher so we based ours on our own ‘dish journey’(!!). For us, our usage patterns meant a slightly modified layout to theoretical common usage patterns, BUT its not different enough to be a pain for resale, or others using it.
Luckily our joinery designer was more than happy to explain the pros and cons of different options, meaning we could consider all the options fully informed. Once any changes had been confirmed she was then able to make the changes to suit us with ease.
The Little Things!
Other modifications I made were again based upon how we as a family use the kitchen, and where we prefer to store stuff. It’s also a bug bear of mine that the drawers or shelves are not deep, or high enough for the large food storage containers, resulting in stealthy containers launching takeover bids for other cupboards. So, changes included deeper drawers in the pantry, deeper compartments in the platter cupboard above the fridge (whilst still allowing ventilation), AND ensuring we had two big drawers for those unsightly plastics the kids constantly mess up (this means they can stay messed up)!! None of these are big things, and yes, we would cope without them, BUT if you are building new why not make sure the work-ability works for you and your family when you have the chance? Having a designer that listens and understands this makes the process a hell of a lot easier.
……More Little Things!!!!
Again, has anyone noticed how some clothing liquids and stain removers are in tall bottles, and, if height challenged like me, reaching up and pulling out chemicals from a high cupboard means possible disaster?? My last house had a brilliant solution!! Right next to the washing machine was a DEEP drawer where every liquid and powder you could conceivably need for the laundry was easily accessible and they fitted!! I think it was meant to be for sorting dirty washing but who cares! 😊 Even a low cupboard would work but it highlighted to me the need to consider what works for me as the main ‘user’ of the area….what would niggle at me and what would be downright frustrating. Another thing I have considered is the way the cupboard doors open…….if you are stood at the sink/washing machine etc and need to grab something you don’t want to move around a door to get into a cupboard, you want to gain access in place? Simple things eh!!!
Internal Doors and Openings
I almost didn’t attend an internal door meeting with our supplier on site, but it was worth it – there was a bit to consider.
Now that we had decided to keep the hallway raking the high ceilings, I suggested we needed to consider higher doors. Not only would this be better aesthetically (our opinion only) but higher doorways allow even better airflow. It would also mean it would match our idea for high double cavity sliders in the living area and make everything look more balanced. Downside is extra expense…………but my husband hasn’t banned me from site meetings yet!!!
However, I did back down (yes its true!) on a timber double cavity slider due to the difficulty of ensuring these large sliders stay straight and don’t warp, without a huge extra expense. The large painted sliders we are pricing are strengthened with a steel frame and poly, and we will add a small area of vertical glass into them to allow light in and a line of sight into the lounge when the doors are closed.
Another consideration is the way they open and which side is hinged. These are often drawn on plans, and the openings quite obvious, but it pays to consider before ordering the doors (cupboard doors being most likely to change). We had the ability to include a couple more small storage cupboards in the hall – but what are they to be used for? One of ours was coats and shoes so the cupboard door opening should be facing the entry door, our other cupboard we are thinking of storing family games etc – so this door we wanted to open up facing the living areas, not the bedrooms as drawn on the plans.
So, What’s the Take Home?
The learning from these ‘Little Things’ is to think about what you like and don’t like about the homes you have lived in, and friends houses you have visited, and use it when considering your own spaces. It’s not just about the look and the budget – its about how you live and how you use your spaces, and sometimes little changes can make big differences, and remove those bug bears and niggles!